So here it is. The first of the offical winpwn releases. This is much more stable then the beta releases and includes many changes 

New features include:

- Completely rewritten installer app that adds support for nearly every package (Including Cydia)
- You are now able to remove items from installer
- Change logos without restoring. This was requested by a LOT of people

Bug fixes in 1.0.0.3

- GDI bug when adding custom logos fixed
- Winpwn installer app "no message" and button unclickable fixed
- iPhone/iTouch stuck on bootlogo screen fixed
- Various Bug fixes & features 

Be sure to read the README! and as always i take no responsibility for winpwn. See the disclaimer in the credits section.

Downloads

[WinPwn 1.0.0.3 RC1 (Rapidshare)]
[WinPwn 1.0.0.3 RC1 (local mirror)]

We’ve had rumors, rumors, and more rumors, but now “someone very, very close to the 3G iPhone launch” has confirmed the 3G iPhone will be released June 9th at the WWDC Keynote. 

International users will have the phone within a few weeks of the US launch – not the previously rumored end of ’08. Also notable, the iPhone will (at least in some countries) NOT be selling at a… [Read More]

So here it is. The first of the offical winpwn releases. This is much more stable then the beta releases and includes many changes 

New features include:

- Completely rewritten installer app that adds support for nearly every package (Including Cydia)
- You are now able to remove items from installer
- Change logos without restoring. This was requested by a LOT of people
- Various Bug fixes & features

Be sure to read the README! and as always i take no responsibility for winpwn. See the disclaimer in the credits section.

Downloads

[WinPwn 1.0.0.2 RC1 (Rapidshare)]
[WinPwn 1.0.0.2 RC1 (local mirror)]

The settings page was found in the latest beta release of 2.0 firmware. IF you don’t know, 3g drains cell phone batteries very quickly. Don’t worry in an effort to save some battery life Apple has included a setting to turn 3g off, and use normal slow edge instead.

So with your 3g iPhone you’ll have a choice, murder your battery or surf at 1995 speeds.

Step One
If your hard drive is an external drive, connect it to the computer. Launch Disk Utility from the Applications:Utilities folder.

Step Two
From the list on the left select the drive you would like to format

Step Three
Click to select the Partition tab.

Step Four
From the Volume Scheme dropdown select the number of partitions you would like to create on the drive.

Step Five
Select a Partition (ie Untitled 1) then give it a Name, Format, and Size.

Step Six
You can also drag the handle between the partition boxes to resize the partitions.

Step Seven
Select the remaining partitions and enter their Volume Information.

Step Eight
Note you can use the Plus and Minus buttons to add or remove partitions.

Step Nine
Press the Options… button to choose a partition scheme for the hard disk.

To use the disk to start up an Intel Mac select GUID Partition Table. To use the hard disk to start up a PowerPC Mac select Apple Partition Map. To use the disk to start up a Windows computer selectMaster Boot Record. Press the OK button to set this option.

Step Ten
Press the Apply button to begin partitioning.

Step Eleven
A window will popup asking you to confirm the partitioning. Please note this will permanently erase all data from the disk. Click the Partition button to continue.

Step Twelve
Notice the status bar shows the progress of the partitioning.

Step Thirteen
Once the partitioning is complete Disk Utility will update and show the new volume information for your hard disk!

——————————————-  
]]> http://iphonecoder.wordpress.com/2008/05/11/mac-os-x-partition-a-hard-drive-using-mac-os-x-disk-utility/feed/ 0 iphonecoder http://iphonecoder.wordpress.com/2008/05/05/winpwn-update-050508/ http://iphonecoder.wordpress.com/2008/05/05/winpwn-update-050508/#comments Tue, 06 May 2008 03:07:54 +0000 iphonecoder http://iphonecoder.wordpress.com/?p=43 ]]> Thanks to all the people emailing me with bug reports. Here is the latest build with a bunch of bug fixes. 

winpwn_0.99.2.19.zip
Mirror 

\cmw

Warning This is still a Beta release. It’s pretty stable but i would still advise waiting for final release

This release is not disabled in anyway. I no longer use QEMU and You will see some new features and will notice that it takes < 60 seconds to build and IPSW (at least on my machine). I have had reports that it has issues with Ipod 2.0225C but other then that it should work perfectly. If you find a bug please email me ( cmw@toc2rta.com ). This was built as a Debug bin and no code obfuscation was used. I will release full sources after we finish more beta tests

I would also like to note that this release would not be possible without the work of Squpix and Planetbeing who have helped develop and test winpwn.

\cmw

winpwn_0.99.2.18_Debug.zip
Mirror 1

PLEASE NOTE IN THIS CURRENT BETA UNLOCK IS DISABLED. YOU WILL HAVE TO UNLOCK USING BOOTNEUTER FROM INSTALLER!

Step One
Download the WinPwn to your Desktop from Rapidshare, Erdcaged, Prodigy60 

Step Two
Download the iTunes DLLs to your Desktop from Prodigy60, MegaUpload 

Step Three
Download the .Net 2.0 Framework from here 

Step Four
Double click the downloaded .Net 2.0 Framework(dotnetfx.exe) on your Desktop and install it. You may not have to do this if its already part of your system (ie Vista).

Step Five
Double click the WinPwn executable you just downloaded to your Desktop. (winpwn_0.99.1.8BETA_Setup.exe)

WinPwn will open an installation helper. Click the Next button to begin.

Choose whether you would like Desktop Shortcuts created then click the the Next button.

Enter a destination folder to install WinPwn to. ie c:\program files. Click the Next button to continue.

Once Installation is finish click the Finish button.

Step Six
Extract the itunesdll.zip you download earlier to the folder you installed WinPwn to. In my example this would be c:\program files\winpwn

Step Seven
Download the firmware you would like to pwn. You can find links to the released firmware files here

Step Eight
Launch WinPwn by double clicking its icon on the Desktop.

Step Nine
Click the Browse .ipsw button.

Step Ten
Select the firmware you would like to Pwn and click the Open button.

Step Eleven
WinPwn will then check if your firmware is valid. Attach your iPhone to the computer. Now click theiPwner button on the left side of the window.

Step Twelve
WinPwn will then attempt to put your iPhone into recovery mode. If it does not succeed then you will have to do this manually. Hold down the Sleep/Wake and Home buttons until the iPhone reboots and the Apple logo appears. Once you see the Apple logo release the Sleep/Wake button and keep holding down the Home button until your see the iTunes logo and the dock connecter displayed on screen.

Step Thirteen
You will then be notified that your iPhone is being Pwned. Please wait until your iPhone reboots.

Step Fourteen
WinPwn will then inform you that your iPhone has been Pwned! Now click the IPSW Builder icon on the left.

Step Fifteen
From the Applications tab select the packages you would like to install. NOTE*: The beta version of WinPwn only installs Installer.app.

Step Sixteen
Normally we would go into the Advanced tab and enabled the unlock option. Unfortunately, in this current beta we must unlock later by using BootNeuter installed via Installer.app

Step Seventeen
Click the Build .ipsw button.

Step Eighteen
Select a location to save the customized firmware to and click the Save button.

Step Nineteen
A dialog box will popup when your ipsw file has been successfully built. Click the OK button.

Step Twenty
Open iTunes by launching it from your Programs.

Step Twenty One
Select your iPhone from the list on the left. Hold down Shift and click the Restore button.

Step Twenty Two
Select the custom firmware file (iPhone1,1_1.1.4_4A102_Custom_Restore.ipsw) we just created and click the Open button.

Step Twenty Three
iTunes will then restore to our new custom firmware.

Step Twenty Four
Once iTunes restore is complete your iPhone will reboot. To unlock your iPhone follow the instructions below.

Step Twenty Five
Install BSD SubSystem by following the tutorial here

Step Twenty Six
Add iClarified to your list of Installer Sources by following the tutorial here.

Step Twenty Seven
Press to launch Installer from your SpringBoard.

Step Twenty Eight
Press to select the Install tab at the bottom of the screen.

Step Twenty Nine
Press to select iClarified from the list of Categories.

Step Thirty
Press to select BootNeuter from the list of Packages.

Step Thirty One
Press the Install button at the top right of the screen.

Step Thirty Two
Press the large red Install button that appears.

Step Thirty Three
When asked to confirm the installation please press the OK button.

Step Thirty Four
Once installation is finished you will be returned to the Categories menu. Press the Home button to return to your SpringBoard. You will now notice a BootNeuter icon. Press to launch it!

Step Thirty Five
You will now have the ability to Neuter your bootloader, Unlock your baseband, Reflash your bootloader to 3.9BL or 4.6BL, and Fakeblank your bootloader. 

If you are on 3.9BL you will probably want to select 3.9BL, Unlock, and Neuter.

If you are on 4.6BL you will probably want to select 4.6BL, Neuter, Fakeblank, and Unlock.

Once you have selected your desired options press the Flash button at the top right hand corner.

THANKS***: Make sure to thanks to cmw, asap18, bgm, Bugout, bushing, chris, dinopio, drudge, Fred_, ghost_000, gray, kroo, MuscleNerd, NerveGas, netkas, np101137, planetbeing, pr3d4t0r, pumpkin, pytey, roxfan, sam, Turbo, w___, wizdaz, Zf, Sam and others. These guys have put alot of hard work into making this a reality.